HomeFocus.com Create Listing
Contractor Directory Talk Boards Ask the Expert Resource Library Top Real Estate Agents Home Plans
Home | Contact Us | Job Opportunities | Client Login


It's fast, easy
& free!

click here


Login

Username
Password

I forgot my password




Ren Molnar Bio



Ren Molnar Archive



Homefocus Archive


Expert Q Ren Molnar Q&A Archive
Top > Tools & Equipment > Tool & Equipment

Question:

I am having a dispute for the last 20 years with a neighbor who is now at the point of shouting out insults when we are ignoring him. I believe I can resolve the situation if I erect a fence. My neighbor's driveway runs along the side of the proposed fence line and I have already researched the rules and regulations regarding fence height, width, etc. Now, I'm putting the fence on my side of the yard but my neighbor is trying to prevent this and he has chosen to keep his car right on the property line but to his side. Does anyone have a suggestion as to how I would get his car away so we could pull an auger beside and no damage will be done. And yes, we have tried asking nicely. If you had to build a fence what would you do?

Sincerely,
Carolina Moore
carolina.moore@rogers.com

Answer:

The length of the car is no more than two fence posts distance and two holes can be punched with a manual post hole puncher. This is basically two spoons (one for cutting the soil and the other to lift out the debris once you've got enough to justify lifting) hinged just about a foot or so from the bottom. It has two long handles that look like straight shovel handles and is easy to operate. You can also get to within an inch or so of any obstruction (house, garage, car, etc.). I'd probably stand a sheet of 4X8 plywood between the hole and the car so there would be no chance of accidental scrapes or dents. You can make the holes as wide as you like and then protect them against rot. To protect the wooden fence posts from rotting at grade level, take a 2-foot length of copper pipe and drill a series of 1/8” holes in a straight line along its full length. Now cap one end and with large staples, fasten it to the wooden fence post in such a way as to have the holes facing wood and keep only two inches of the open end above grade level on the sides (not the back nor front) of the post. Once you're done, you can put the post(s) in place and pour pre-mized concrete around it. You don't even have to mix the concrete if you get the right stuff because adding water will do the job for you. Every spring and fall (quarterly if the post is larger than a 4X4), fill these pipes with a good liquid wood preservative and just let it soak in.

In the interests of retaining credibility and in fairness to all, I cannot recommend prices, people nor companies for various projects. Courtesy of Ren Molnar, Construction Consultant at HomeFocus.com. I can also be reached at (613) 748-3003 and Home Focus – The Radio Show is broadcast live 8 to 10 A.M. (Ottawa, Ont. time) on Saturdays on www.cfra.com.

Remember, even if you don’t do your own work around the house have to hire someone, you put yourself at a great advantage when you can intelligently discuss a project with the various trades people.

"Ren’s Ren-O-Vations Tips"
is a monthly journal that talks everything to do with HOME OWNERSHIP & MAINTANENCE.

It is sent out in time to have it in your mailbox or on your computer by the 20th of the month – every month.

To order, simply send a cheque or money order to:
Ren,
P.O. Box 9411,
Ottawa, Ontario,
K1G 3V1

E-mail – 12 issues (1 yr.) $17.95.
Regular mail – 12 issues (1 yr.) $33.95.
(subject to change without notice)
Credit card companies take a cut from payments so we are not credit card friendly - can't justify it.
Ren’s Ren-O-Vations Tips
makes the perfect gift any time for almost everyone:
Be My Valentine, Easter, Christmas, Mothers’ Day, Fathers' Day, Birthday, Wedding, Congratulations New Home Owner(s), Thinking Of you,
Good neighbour
Ren

Answered By: Ren Molnar

More Questions & Answers ...

1. Is there a simple way to eliminate a fairly deep cigarette burn in a soft wood table top (maybe pine) without ...
2. The furnace was replaced and moved. Where the old furnace was is left a concrete pad approx. 5X3 ft. and 1 ft. ...
3. The carport lean-to is completely open on three sides sharing one wall of the garage. It consists of only a ro ...
4. I wish to refinish our wooden fireplace mantle. It is presently a stained finish, but one side faces a stairca ...
5. Our home is 17 years old and I am starting to notice that a couple of our doors are starting to separate(panel ...
6. I am having a dispute for the last 20 years with a neighbor who is now at the point of shouting out insults wh ...
7. I recently bought a used 10 gauge 21 angle air framing nailer. The nails are in strips not a coil. I used it o ...
8. I want to know how to read a tape measure ...
9. What is the best tool to use to cut panneling. The panneling is very thin and since this will be the finishing ...
10. How can I lay out a 65 degree angle on a framing square? ...
11. I have an old carpetners square and on the short arm are the numbers (hand stamped) 2545-2970-3395-3819-4243 e ...
12. What is the difference between a pancake style compressor and a double tank style compressor. ...
13. What is the best/easiest way to strip plastic laminate from a coffee table - preferably without chemicals.
...
14. What is a double pinned marking gauge? ...
15. I am thinking of buying a router to assist me in building some cabinetry and doing some finishing touches on s ...
16. how do I use it? ...
17. I need your help as I want to surprise my husband with a cordless drill for his birthday in September. He only ...
18. How do you find the center of a circle using a carpenter's square? ...
19. Do you know the best way to drill an extra tap hole in a stainless steel kitchen sink? Would a bi-metal hole s ...
20. thanks for answering my question. also, one more thing, is it important to use a notched trowel then a regular ...
21. I'm actually asking this on behalf of my dad. As a young carpenter many years ago, he once saw an old-tim ...
22. We have a 3 storey 100 yr+ house. The floor joists on the first floor are 2"X 8' 2' on center with a 1 ...
23. My 30 year old detached garage has developed a 4 inch sag in the roof line. This is a 2 car garage about 20x24 ...
24. My front hand rail is made of hard wood (I'm not a connoisseur of wood) and the finish is looking old, warn d ...
25. Can I paint over cupboard doors in the kitchen that were painted and then varathaned, or do I have to sand the ...
26. I've heard you say many times how easy it is to remove water stains from wooden tables. Now it's happened to ...
27. Recently our daughter and son-in-law purchased an older house (about 70 years old), and found all the walls we ...

Home Plans