Ren Molnar Archive - Home Focus



Home \| Contact Us \| Job Opportunities \| Client Login

It's fast, easy
& free!
click here

I forgot my password

Ren Molnar Bio

Ren Molnar Archive

Homefocus Archive

Expert Q Ren Molnar Q&A Archive

Top > Tools & Equipment > Masonry

Question:

Is there a tool or grinder to polish and shape the edge of granite tile. If so where would I locate one?

Answer:

Check with you local rental agency. They'll have something for you.

Courtesy of Ren Molnar, Construction Consultant at HomeFocus.com. I can also be reached at (613) 748-3003 and Home Focus phone-in is broadcast live 8 to 10 A.M. (Ottawa, Ont. time) on Saturdays on www.cfra.com

Answered By: Ren Molnar

More Questions & Answers ...

1.	I drilled a 1/2 hole in masonry brick to install a 5/16 lag lead shield and bolt. I did not drill the hole dee ...
2.	I own a 10 year old house in Orleans, Ontario with a large double car garage, I want to put an entrance door f ...
3.	My garage used to be a carport and it has a slanting floor which causes the water to be trapped in a corner. I ...
4.	I had a furnace installed last week and while the crew was here I had them drill me a new hole for a dryer ven ...
5.	I am planning to put up a two car garage this summer. What type of foundation should I put it in? I intend to ...
6.	I am trying to anchor a "sun shelter" into patio stones. I live in a very windy place and it is very sandy, s ...
7.	I have 25 year old steel frame sliders in the basement. The panes are leaky and the steel frames are rusting b ...
8.	Is there a tool or grinder to polish and shape the edge of granite tile. If so where would I locate one? ...
9.	How can I open a hole on the wall for the c/vac exhaust? What tools would I need? What few things should I ...
10.	I've just knocked down an interior wall in my house to the exposed brick. what can I use to clean the bric ...

Home Plans