HomeFocus.com Create Listing
Contractor Directory Talk Boards Ask the Expert Resource Library Top Real Estate Agents Home Plans
Home | Contact Us | Job Opportunities | Client Login


It's fast, easy
& free!

click here


Login

Username
Password

I forgot my password




Ren Molnar Bio



Ren Molnar Archive



Homefocus Archive


Expert Q Ren Molnar Q&A Archive
Top > Vents > Roof

Question:

Ren: Your radio show in Saskatoon, Saskatchewan is a taped version and played Saturday PM. I really miss your program.
I use a wheelchair and cannot do many things myself. I am vulnerable to opinions of others; some who are excellent others questionable.
After hearing your program over the years I have seen many consistencies that allow me to trust your advice.
My problem is that I have received several recommendations to create better air circulation in my attic.
My home is 60 feet long by 24 feet wide with a 30 X 24 foot living room 'teed' from the centre of the main part. There are three gabled ends.
I had two power vents on the roof when I moved into the house. Two years ago one collapsed and rain came in through the living room ceiling
which is stained. (How can I get the water stain out?) The soffit vents (16 in all) have been boxed in. The only source of make up air are
through the three gable vents.
One contractor recommended I get rid of the power vents and install gravity vents. I did this and the heat build up was even worse in the
living area of the house.
On your radio show I've heard you repeatedly tell people to install soffit ventilation. I hired a contractor last summer to put in soffit vents.
However, he convinced me what I needed was not soffit vents but 4 whirley-birds. One in the centre and three at each end. I did this and
the heat build up continues.
I contacted a fellow and he emphatically stated that I need the soffit vents. I have contacted three more contactors for
quotes to put in 16 soffit vents. They all have come back with different solutions.
They all say that the slope of the roof is so low approximately 18 inches at the centre. (These are prefab truses) About 12 inches if insulation has been
blown in. They say it is almost impossible to get soffit vents in past the insulation. If they use pipes it, they would need to be about 15 feet long.
None of the three want to go with the soffit vents. One guaranttees all problems will be resolved by installing two powered gable vents (one at each end
of the long section of the house). These would be 350 to 500 CFM and thermostatically controlled to kick in at 90 degrees. Another disagrees in what
happens to the air flow in the centre stating we are creating a negative pressure at that poinr and will only exhaust at the gable ends. The other one
suggests a centre whirly bird and putting a "chimney" type structure to have the whirley birds draw outside air from the roof line and down
as low to the insulation as possible.

Ren, I know this has been long but I've seen the small openings in the trusses in the garage and no one could crawl through them. How would they insert
soffit vents? Is it possible? Is it the answer? The contractor recommending and the powered gable vents said he's done this for 16 years and will guarantee
it will work.
I tried to phone you for help and I hope you can give me some advice.

Keep up the excellent work. I catch your show when I can.

Answer:

I normally respond only to questions taking up half a monitor screen or less. I get a lot of questions and time becomes a serious consideration. Let's take these things one at a time.

The stain on the ceiling will be covered by a good stain deadening paint and that's available at your local paint store. Then you can paint over it.

Soffit venting can be done properly when the hole is cut for your new vents, U chanels can be installed to ensure unobstructed air movement up into the attic cavity. If there are already vents there, that means they can be installed and all it takes is a bit of extra effort. Yours is about the only case in the past few years where I would reccomend the whirly bird vents and I would want one centred on each of the three wings.

Answered By: Ren Molnar

More Questions & Answers ...

1. I have recently purchased a 26 year old home, which has a bathroom fan that vents directly into the attic (blo ...
2. We will be re-shingling our roof this weekend. I want to know if we have to put "tar paper" on all of the roof ...
3. Last fall I had a furnace installed in the attic. (No basement, minimal crawl space). Previously I had a heat ...
4. I am an architect. I have been looking for options on website and having trouble finding appropriate suggesti ...
5. I was wondering can I clean attic mold myself and how and with what and so I have to replace all the insulatio ...
6. We have a cottage with exposed rafters and the previous owners have some rigid foam insulation about 1 inch t ...
7. We have a single turbine vent on our roof. It is turning without issue but squeaks when it does. What's t ...
8. How do you keep snow from blowing in through round, "can style", roof vents. The house is 13 yrs. old. I hav ...
9. Our bungalow wasbuilt in 1956 and we are now replacing the roof again. The roofers are giving us mixed signal ...
10. How do I effectively ventilate a Cathedral roof. I have a severe Ice damming issue and have had water seepage. ...
11. I have a 7 year old row unit that faces south. I get a build up of ice ever year on the noth side. I have trie ...
12. I have a well-built 4-yr old 50 X 30 ft. bungalow with a well-pitched roof, fully-vented soffits, foot-square ...
13. Listen to you on CKLW 800 Windsor, Ont. Today on your show a gentleman called about snow blowing into his atti ...
14. You told me how to install the vent. I need to know if one has to buy this baffle assembly or can one build it ...
15. I have the traditional flat, square style roof vent. Birds are nesting inside on the wire mesh. I need to remo ...
16. We have a roof turbine that is making so much noise every time it's windy. It sounds like a bird in pain. ...
17. I had a tear-off, new roof with a ridge vent installed (gable to gable). My roofing salesmen said that I shou ...
18. I recently had a bath fan installed by an electrician and was planning on venting to the soffit area. I was t ...
19. I have a round cottage with a dome roof. The dome is formed by triangles in about 4' sections. One up righ ...
20. Ren: Your radio show in Saskatoon, Saskatchewan is a taped version and played Saturday PM. I really miss you ...
21. Is there any advantage to the types of ridge vent commonly available, i.e. the fibre mesh roll type versus the ...
22. Could you let me know how much attic ventilation that we need, is there a formula that is used to calculate th ...

Home Plans