HomeFocus.com Create Listing
Contractor Directory Talk Boards Ask the Expert Resource Library Top Real Estate Agents Home Plans
Home | Contact Us | Job Opportunities | Client Login


It's fast, easy
& free!

click here


Login

Username
Password

I forgot my password




Ren Molnar Bio



Ren Molnar Archive



Homefocus Archive


Expert Q Ren Molnar Q&A Archive
Top > Vents > Soffit

Question:

I replaced my roof this summer and the contractor and I both felt the roof suffered from a lack of ventilation to the attic. There are 3 turbines on the roof but I believe the rigid foam in the soffits have collapsed. What can I do? It is not easy to go in the attic as I put in R50 of blown insulation.

Answer:

You may very well be into taking off the soffits, installing new and more rigid venting system there and then replacing all the vented soffit. If that's the case, the aluminum components can be numbered and removed. Numbering makes it more convenient to re-install them. To ensure that they all go back the same way, a soft pencil can be used to put a small mark on each second one and a corresponding mark on the siding. When pencil marks no longer align during re-installation, you know that at least one panel was not put into precisely the same spot it was removed from. When you re-install all of it, the pencil marks can be removed easily.

Answered By: Ren Molnar

More Questions & Answers ...

1. I have recently purchased a 26 year old home, which has a bathroom fan that vents directly into the attic (blo ...
2. Last fall I had a furnace installed in the attic. (No basement, minimal crawl space). Previously I had a heat ...
3. I replaced my roof this summer and the contractor and I both felt the roof suffered from a lack of ventilation ...
4. My father is having a new roof put on his house and would like your advice on continuous ridge venting. Here a ...
5. I am a single Mom (40 something) and now live in a non-profit housing (townhouse) which is geared to income. I ...
6. I just had a roof replaced. The salesman who sold me that I didn't have enough ventilation. He suggested more ...
7. I am an architect. I have been looking for options on website and having trouble finding appropriate suggesti ...
8. I had asked about putting a steel roof on our mobile home over original aluminum roof and put 1 inch styrafoam ...
9. I was wondering can I clean attic mold myself and how and with what and so I have to replace all the insulatio ...
10. There doesn't seem to be enough insulation under our roof or garage. I need help. Where can i get some? ...
11. I'm having a new roof put on my 1.5 story, hip roofed home and have been reading about the importance of ...
12. My attic gets pretty hot in the warm weather. When I look under the metal sheets for the soffits, it looks li ...
13. 110 year old farm house, one and a half stories, therefore no soffits since roof rafters sit right on brick wa ...
14. I'm building a new home this summer and much of it will be custom work. The roof on it will be a hip roof ...
15. Our bungalow wasbuilt in 1956 and we are now replacing the roof again. The roofers are giving us mixed signal ...
16. i want to add insulation to my attic which now has about 1 1/2 in. of loose and paper wrapped insulation in it ...
17. In the vinyl on my wood trim, I am asking that more ventilation holes be cut in the soffits before they vinyl ...
18. Our new house will have cedar siding exterior with one 32' x 5' front porch covered and one 16' x ...
19. I had a tear-off, new roof with a ridge vent installed (gable to gable). My roofing salesmen said that I shou ...
20. The soffit vents of my house are stuffed with insulation which is very difficult to remove. I understand the ...
21. i have condinsation drops built up on the roofing nails that poke through the sheathing of my roof. there is ...
22. I do not have U channels but plan to put some in next year including roof vents. Do I remove the part of the i ...
23. I didn't receive your response to the 2nd part of the e-mail I sent to you concerning attic insulation.
24. For the past two winters, we have had leaks around three of our upstairs windows. I saw somewhere that this c ...
25. Ren: Your radio show in Saskatoon, Saskatchewan is a taped version and played Saturday PM. I really miss you ...
26. My house has a hip roof. We install new shingles last week. I noticed there are no holes in the wood soffits ( ...
27. I recently purchased a 75 yr. old story and-a-half, just outside of Edmonton, Alberta. As the home is not very ...
28. Attic 500 sq. ft. cellulose(?) blown in insulation 3 gable intakes of 365 sq. in. l roof exhaust vent unable ...
29. I have a fifty year old 24 ft by 24 ft story and a half garage. There are living quarters upstairs with a 13 ...
30. My metal roof has a cap but there is no air space through which air can escape. Under the metal roofing there ...
31. I have a 50 yr. old house with about 10 inches of insulation in the attic (gabled roof) and individual soffit ...
32. With five people showering in our house, there is a tremendous amount of humidity in our bathroom, even with t ...
33. Could you let me know how much attic ventilation that we need, is there a formula that is used to calculate th ...
34. I live in a 14 unit townhouse. And ice dams originate on the two units on the top level: the highest point of ...
35. We live in a 17-year-old, two story just north of Bolton, Ontario. We are the original owners. I would like ...

Home Plans