Ren Molnar Archive - Home Focus



Home \| Contact Us \| Job Opportunities \| Client Login

It's fast, easy
& free!
click here

I forgot my password

Ren Molnar Bio

Ren Molnar Archive

Homefocus Archive

Expert Q Ren Molnar Q&A Archive

Top > Electrical > Permit

Question:

How to wire two 3 way switches to control 4 set of lights? When the source of power go to the 3 set of lights first then to 2 two way switches and then to the last light.

Answer:

When you apply for the electrical permit your local power authority will gladly give you a diagram to follow.

Answered By: Ren Molnar

More Questions & Answers ...

1.	Please give me the pro's and con's of breaker boxes versus fuse panels. I have a fuse box that I� ...
2.	I'm planning on increasing the wiring my in basement for a spare bedroom(5 plugs and 1 light). Does this ...
3.	We are finally renovating our kitchen after settling into our first home, a 1960's bungalow. I am replaci ...
4.	I am looking for the diagram for installing a new outlet in my basement.the new outlets have one large and one ...
5.	I'd appreciate some advise on running an electrical circuit to my exterior shed from my electrical panel ...
6.	We are in a new house - 2 years old. We are finishing the basement. The outside walls were studded, insulate ...
7.	My main panel in my house is full, and I want to install a sub-panel in my garage to deal with power-hungry to ...
8.	How to wire two 3 way switches to control 4 set of lights? When the source of power go to the 3 set of lights ...
9.	I just wanted to know about installing a rough-in for a bathroom to be put in a basement. Can the foundation ...
10.	Im closing in some stud walls in the basement (drywalling) I have run regular wiring for lights etc. Is the ...
11.	I have installed two lights in my hallway and I want to have a light switch at each end of the hall. How do ...
12.	We would like to install a bathroom in the basement. It would consist of sink, toilet and shower stall. Is th ...
13.	How do I install a three way light switch in a new installation? ...
14.	I am thinking to renovation the basement add a bathroom. The stud wall is already there from the original buil ...
15.	I am renovating a basement in a house built in 1960. It has a 60amp panel. Although it has 4 slots available ...
16.	In the early 70's, developers used aluminium wiring in residential developments. Later it was determined ...
17.	i was told i can add a 100 amp panel to my 100 amp panel & join them getting 200 amps.is this recomended or sh ...
18.	Hi i am trying to build a small 2 bedroom home 2 level in my back yard( the back yard is 50 feet long and 25 f ...
19.	I am in the process of finishing a basement bathroom and have used metal studs to frame the outside walls agai ...
20.	I want to switch my 200a service that uses fuse's to a 200a service with breakers. Now my question is wha ...
21.	I am considering upgrading my electrical system in my home from 60 amp service to 100 amp service, but i have ...
22.	I want to run some wiring for a receptacle for an over-the-range microwave. I want to use an existing circuit ...
23.	When I removed the strip lighting bar I discovered that there is no junction box in the wall. The wires are m ...
24.	I asked this question about a week ago but I don't seem to have received a reply. I have two 30 amp ciruit ...
25.	I am replacing an existing light fixture in the kitchen. I removed the old light and noticed that it was hooke ...

Home Plans