HomeFocus.com Create Listing
Contractor Directory Talk Boards Ask the Expert Resource Library Top Real Estate Agents Home Plans
Home | Contact Us | Job Opportunities | Client Login


It's fast, easy
& free!

click here


Login

Username
Password

I forgot my password




Ren Molnar Bio



Ren Molnar Archive



Homefocus Archive


Expert Q Ren Molnar Q&A Archive
Top > Fasteners & Adhesives > Nails

Question:

I am putting down 8 mm laminate flooring and when I get rid of the existing carpet I find the builder has put some type of hardwood flooring (small oak boards 4 feet long by 3/8 inch thick tongue and groove and nailed in the usual hardwood fashion), down directly on the 1x7 inch diagonal sub floor which runs at a 45 dgree angle across the top of the floor joices. I have a lot of squeaks so I need a stiffer sub floor/underlay combination. I have tried to screw the hard wood down to the sub floor boards (between the joices), but of course it just spilts when the head of the screw tries to counter-sink into the hardwood and you could never tighten it together. Can I put 3/8 chip-board down on top of this existing hardwood flooring and screw it to the sub floor (diagonal) boards.

Answer:

The dieagnally laid sub-flooring will have to be properly nailed down after you remove everything from it. Four spriral nails (2.5") per board per joist should do that for you. You could probably get away with 2" hot galvanized spiral nails as they hold better. I'd also drive them in at a slight angel laying across the joists they go into. You can then lay in the new flooring by following (to the letter) the instructions that come with your new laminate product. I cannot over-stress that everything that is presently there has to be removed from the sub-flooring though. Laying anything over the existing hardwood will only give you more squeaks.

In the interests of retaining credibility and in fairness to all, I cannot recommend prices, people nor companies for various projects. Courtesy of Ren Molnar, Construction Consultant at HomeFocus.com. I can also be reached at (613) 748-3003 and Home Focus – The Radio Show is broadcast live 8 to 10 A.M. (Ottawa, Ont. time) on Saturdays on www.cfra.com.

Remember, even if you don’t do your own work around the house have to hire someone, you put yourself at a great advantage when you can intelligently discuss a project with the various trades people.

"Ren’s Ren-O-Vations Tips"
is a monthly journal that talks everything to do with HOME OWNERSHIP & MAINTANENCE.

It is sent out in time to have it in your mailbox or on your computer by the 20th of the month – every month.

To order, simply send a cheque or money order to:
Ren,
P.O. Box 9411,
Ottawa, Ontario,
K1G 3V1

E-mail – 12 issues (1 yr.) $17.95.
Regular mail – 12 issues (1 yr.) $33.95.
(subject to change without notice)
Credit card companies take a cut from payments so we are not credit card friendly - can't justify it.
Ren’s Ren-O-Vations Tips
makes the perfect gift any time for almost everyone:
Be My Valentine, Easter, Christmas, Mothers’ Day, Fathers' Day, Birthday, Wedding, Congratulations New Home Owner(s), Thinking Of you,
Good neighbour
Ren

Answered By: Ren Molnar

More Questions & Answers ...

1. When installing hardwood flooring on an existing set of stairs made of softwood what is the proper installatio ...
2. What would you recommend, a power stapler or a power nailer to lay down 3/4" Oak flooring over 3/8" plywood sc ...
3. What if some of these water blisters appear in inside clad walls? I'm wondering if the weight from the ice sto ...
4. House is about 30 years old and lately "blisters" in the wall are showing where the drywall screws or nails ar ...
5. I am looking for how to do a hardwood floor starting from the tree to completion. The tree being Ash. ...
6. I believe I heard you say, on radio, that ice and water shield is good to use on valleys, using a number of sh ...
7. I want to convert my cottage roof to a cathedral ceiling. It is presently a 5/12 pitch with rafters made from ...
8. I've just installed a hard wood floor. The floor was squeaking previously so when I removed the carpet, I adde ...
9. When I go to nail two pieces of wood together they split and I remember my dad doing something that would prev ...
10. We've recently had a 600 square foot pressure treated deck professionally installed. Only three weeks af ...
11. I am putting down 8 mm laminate flooring and when I get rid of the existing carpet I find the builder has put ...
12. Over the years, our cottage is 'settling'. I can repair the cracks in the drywall realitivly easily ...
13. I have heard stories about concrete floors cracking when securing framing using a nail gun. Are there other wa ...
14. How do I remove 4" galvanized spiral nails, holding the decking in place? I would like to save the wood for ot ...
15. I was wondering how to fasten a non-load bearing wall frame to a cement slab. I know there are special "guns" ...
16. I have started to date a wonderful woman that unfortunately has a 16yr old with anger problems and punched and ...
17. I am planning to add 6 inch crown molding to the ceilings of several rooms on the first floor of our home. My ...
18. I would like to change the trim (baseboards & door trim) in a condo where the divisions are framed with metal ...
19. The question I have is regarding the use of metal edging on drywall corners - do you need to just tape and put ...
20. You said there was a special tool that you would use to nail through the carpet and underlay into the joists t ...
21. I am going to be installing an underlay before I put down adhesive floor tiles in our kitchen. I was going to ...
22. When installing a door that the jamb are provided separatley from, should the top or side jambs be insatlled f ...
23. what are the grades of nails ...
24. I purhcased a 6 year old bungalow last year and have a problem with squeaky floors. The floor is particle boar ...
25. I try to drive 1.25" plywood screws through the sub-flooring (5/8" thickness) into the joists to quiet the squ ...
26. I have a home cabinet shop and build primarily furniture type projects for ourselves. I have an 18 gauge brad ...
27. I have plywood floors covered by carpet. One room upstairs has sqeaky- clunky spots as you walk over certain a ...
28. My floor squeaks. I am planning to pull up the carpet and screw it down. I have heard that using wax on the sc ...
29. I AM IN THE PROCESS OF PUTTING CEDAR ON MY VAULTED CEILING AT MY COTTAGE.THE ROOM IS 14X28 AND I AM USING 1/2 ...
30. I have a five year old house and there are a couple of spots where it squeeks very badly. The area underneath ...
31. I'm installing full thickness 1x8 pine t&g flooring in the kitchen (25'x20'). I'm going to use a 2" brad naile ...
32. I've just refinished a 1911 oval mirror frame made of maple. I've got a heavy cardboard behind the mirror, but ...
33. Ren, we are getting quotes on hardwood floor and have been given some conflicting information. One person say ...
34. We have just finished painting my in-laws place and the walls are 3/4 in plaster on the inside and 1/4 inch pl ...
35. I recently bought a 5-level back split and the hardwood floor at the top level of the house keep making noise. ...
36. As a follow-up to my phone call to you last Saturday, what kind of ventilation system would you recommend as b ...
37. Our house was built during a transition from lath and plaster to drywall. The walls have a thin gypsum board ...
38. Our house was built in the late 20's. It had 3 small bedrooms and we are combining two of them to make one lar ...

Home Plans